Two-dimensional stability problem for two interacting short fibers in a composite: In-line arrangement

A solution is found to a plane problem for a composite material reinforced with two in-line fibers and subjected to longitudinal compression. The problem formulation is based on the piecewise-homogeneous model and the three-dimensional theory of stability. The dependence of the critical strain and buckling mode on the distance between the fibers is studied for various mechanical and geometrical characteristics of the composite components.Translated from Prikladnaya Mekhanika, Vol. 40, No. 9, pp. 65–74, September 2004.     

双周期裂纹压电材料反平面剪切问题断裂力学分析

研究压电材料双周期裂纹反平面剪切与平面电场作用的问题．运用复变函数方法，获得了该问题严格的闭合解，并由此给出了裂纹尖端应力强度因子和电位移强度因子的精确公式．数值算例显示了裂纹分布特征对材料断裂行为的重要影响．叠间小裂纹能够对主裂纹的应力和电位移场起着屏蔽作用，相反行间小裂纹却起着放大作用，至于钻石形分布裂纹的影响规律则更为复杂．对于某些特殊情形给予了解答并导出一系列有意义的结果。     

THE INTERACTION PROBLEM BETWEEN THE ELASTIC LINE INCLUSIONS

ＩｎｔｒｏｄｕｃｔｉｏｎＯｆａｌｌｔｈｅｆｉｂｅｒ＿ｒｅｉｎｆｏｒｃｅｄｃｏｍｐｏｓｉｔｅｍａｔｅｒｉａｌｓ,ｔｈｅｓｈｏｒｔ＿ｆｉｂｅｒｃｏｍｐｏｓｉｔｅｍａｔｅｒｉａｌｎｏｔｏｎｌｙｓｔｒｅｎｇｔｈｅｎｓｔｈｅｍａｔｒｉｘｂｕｔａｖｏｉｄｓｄｅｆｅｃｔｉｏｎｓｏｆｔｈｅｌｏｎｇ＿ｆｉｂｅｒｃｏｍｐｏｓｉｔｅｍａｔｅｒｉａｌａｓｗｅｌｌ.Ｔｈｅｍｉｃｒｏ＿ｍｅｃｈａｎｉｃｓａｂｏｕｔｉｔｓｕｃｈａｓｆｒａｃｔｕｒｅ ,ｆａｔｉｇｕｅａｎｄｄａｍａｇｅｉｓｖｅｒｙｃｏｍｐｌｅｘ .Ｉｎｔｈｅｐｒｅｖｉ…     

含噪双稳杜芬振子矩方程的分岔与随机共振

研究了含噪声的双稳杜芬振子矩方程的分岔与随机共振的关系，并根据它们的关系, 从另 一个角度揭示了随机共振发生的机制. 首先在It?方程的基础上，导出了双稳杜芬振子在白噪声和弱周期信号作用下的矩方程，其次以噪声强度 为分岔参数分析了矩方程的分岔特性，再次分析了矩方程的分岔与双稳杜芬振子随机共振 之间的关系，最后根据该对应关系从另一种观点提出了双稳杜芬振子随机共振的机制，该 机制是由于以噪声强度为分岔参数的矩方程发生了分岔，而分岔使得原系统响应均值的能量分布发生了转移，使能 量向频率等于输入信号频率的分量处集中，使得弱信号得到了放大，随机共振发生了.     

Prediction of mixed-mode fracture based on an elasto–plastic energy balance criterion

The maximum energy release rate criterion, i.e., G _max criterion, is commonly used for crack propagation analysis. This fracture criterion is based on the elastic macroscopic strength of materials. In the present investigation, however, the G _max criterion has been modified in order to accommodate the consideration of plastic strain energy. This modified criterion is extended to study the fatigue crack growth characteristics of mixed-mode cracks. To predict crack propagation due to fatigue loads, a new elasto–plastic energy model is presented. This new model includes the effects of material properties such as strain hardening exponent n, yield strength σ _y , and fracture toughness and stress intensity factor ranges. The results obtained are compared with those obtained using the commonly employed crack growth law and the experimental data.     

Stochastic Analysis of Macrodispersion in a Semi‐Confined Aquifer

In this paper, the macroscopic dispersion resulting from one and twodimensional flows through a semiconfined aquifer with spatially variable hydraulic conductivity K which is represented by a stationary (statistically homogeneous) random process is analyzed using the spectral representation technique. Stochastic fluctuation equations of the steady flow and solute transport are solved to construct the macroscopic dispersive flux and evaluate the resulting macrodispersivity tensor in terms of the leakage factor and input covariances describing the hydraulic conductivity in a semiconfined aquifer bounded by a leaky layer above and an impervious stratum below. The macrodispersivity tensor is studied using some convenient forms of the log hydraulic conductivity process. The sensitivity of the resulting macrodispersivity to the input covariances is discussed along with the influence of the leakage factor for both one and twodimensional flows. It is found that the longitudinal macrodispersivities are increased due to the presence of leakage, while the transverse macrodispersivities are reduced due to leakage.     

一种低精度惯性测量单元的精确标定技术

低精度惯性测量单元的温度特性和非线性严重，为补偿光纤陀螺的温度特性和非线性，通过高低温、多速率的标定实验研究了光纤陀螺输出电压与温度、转速的关系，采用零偏和标度因数统一标定的思想提出了光纤陀螺分段模型；为补偿MEMS加速度计的温度特^陛，通过高低温位置实验研究了加速度计输出电压与温度、输入加速度的关系，提出了加速度计分段模型。采用逐步线性回归对以上模型进行了简化。实时补偿效果表明，当温度从-30℃到60℃变化时，在±60（°）／s转速内角速度误差基本小于0．02（°）／s，加速度误差小于0．005g．     

高耸异型烟囱结构风压和风振系数试验研究

本文在模拟的大气边界层中,对某一发电厂高耸异型烟囱的刚性模型进行了测压试验研究,得到了这一结构的平均风压系数、最大和最小风压系数分布,以及该结构的风荷载体型系数;结果表明在烟囱外形明显变化的局部区域,风压绝对值较大,与理论分析一致。同时,对动态测力试验模型进行了高频动态天平测力试验研究,详细介绍了试验及数据处理方法,根据试验结果计算得到了该烟囱在风作用下的动力响应和风振系数;根据试验结果计算所得的风振系数值大于按规范公式估算值。这些结果不仅为结构的风荷载计算提供了依据,也有助于进一步认识该类异性烟囱结构的风荷载和风振特性。     

单相旋转型驻波超声电机的数学模型及仿真

尽管单相驱动的旋转型驻波超声电机的原理样机早巳研制成功，但对这类电机的运动机理的研究却一直局限在定性分析上。本文将从能量角度，根据Hamilton变分原理，定、转子摩擦界面采用纯滑动模型建立了该种电机的数学模型；并根据此模型，用MATLAB语言作了计算机仿真，得到了该种电机的开、关过程动态响应。     

平面坡体渐进破坏模型及其应用

平面坡体渐进破坏模型旨在通过在坡体稳定性分析中引进渐进坡坏的概念,来较合理地考虑岩土材料的峰值强度和残余强度在稳定性分析中的不同作用。通过与其它稳定性分析方法进行比较以及实例应用研究,证明该计算模型可用于初步判断坡体稳定状态并估算其破坏变形范围。这一研究也说明了水对边坡破坏的重要作用。